Steve’s DIY Fairy Lamp House

fairy lamp house tutorialWe love to see our community members creations. Steve spent 3 months working on this amazing Fairy Lamp House for his daughter’s birthday and shared his journey with us.


I woke up one Saturday with no plans for the day. Whilst drinking my morning coffee and going through Facebook, I saw a picture of a man making his daughter a fairy house from a log with a chainsaw. I thought, that would be perfect for my daughter’s 8th birthday present.

First, I jumped on and found hollow logs for sale not far from home. I went out almost immediately, picked three beautiful logs and then spent the next two days cleaning one of them up with the dremel.

2. I had an idea that I wanted window and a door so used a drill with hole cutter bit to randomly cut shapes. Also used a few different sized drill bits to randomly make holes, knowing that light would only really escape from these gaps.

steve 2

3. It was now time to test with some light inside and began dreaming of what may be! I mounted it on polystyrene shapes from spotlight which I glued together and cut out space for the underneath mechanics of the lamp baton. I cut a piece of plywood to secure the lamp holder in place and glued it to the polystyrene. I then carefully sculpted out a recess for the timber to comfortably sit inside so it would not wobble or move.

4. I drilled a hole through the polystyrene at the side for the chord to poke out.


5. Now that the ‘skeleton’ of my overall sculpture was formed, it was time to focus on the landscape…

I knew I wanted stairs up a hill to the front door, so I set about carving the polystyrene in to a rough shape and then plastering over the top. Placing the stones in formation was incredibly difficult but I eventually got them in place and lightly plastered them to stay. My daughter is fascinated by some of the crystals and stones I’ve collected over the years so I thought I’d incorporate them in to this special sculpture for her.

6. Next I made the full size landscape base. I wanted the stairs to lead down a path to a pond so I made sure I left a ‘well’ shaped hole. I also had the idea to put in a real bonsai tree so I left a circle shaped hole for a pot to go in to. After plastering the shape, I used airdrying clay to clean the rough plastering up and give me a more defined shape to work with. I plastered in the stones for the path.

7. Once the airdrying clay was dry, it was time to start decorating. I started by painting soil/rock coloured browns and blacks….

8. With the oiled wood, this was starting to look good. I went and bought supplies from a train hobby shop. I got moss, small lilies and clear resin to start the pond.

I used less catalyst so it would go off slowly. This allowed me to stir in a blue tint and the ever important fairy dust (ground up aluminium). When it started to harden, I balanced the lilies on top. I used little sticks as ‘logs’ and painted them with the resin so they looked wet.

Once it had set, I was able to use the moss matting I had purchased. I cut it to shape and glued on to plaster. I also glued in bigger pieces of moss for variation.


9. Next, I wanted a bridge over the pond so I had saved a nice round piece of timber that I had cut off the bottom of the log to make it flat. I polished it up, glued it in place then super glued sticks along each side. I glued stones around it for steps.

10. The next step was to start creating the roof of the house/lampshade. I got some clear plastic and cut it to shape, rolling it around. I then got a toilet roll and glued stones to it for a chimney. I secured it to the plastic. I bought fake branches with leaves from Spotlight, cut the leaves off and cut them in half. I hot glued them on to the plastic and around the chimney. I also got some Sculpey to craft the top of the chimney and glued it in place.

11. My daughter had previously mentioned fairy houses had circles on top of their roof. Not knowing what she meant, I set about making a circular shape for her using wire. I bought a ring from Spotlight and attached eight long pieces of wire. I shaped them and then spent time making cross sections and sticking them together for stability. I hot glued it to the existing form, ready to add paper mache. Now that the shape was ready for leaves, I wanted more on the bottom to stick out and act as pergolas, so I added wire shapes/


12. At this point, I needed the bonsai to be custom made, so I went and saw a friend who is an expert. He took an existing plastic pot and positioned it in the hole I had left. We then roughly drew the landscape shape around the pot and cut it down to size so it would fit in the hole and not be seen. He then planted and shaped the foliage for me.

13. I wanted a balcony on the side so got a bag of icypole sticks. I made a cardboard template of the rough shape but spent a lot of time getting the inside shape right, as I knew it was going to sit next to the house and I wanted it to sit flush. I took my template and sticks on top, glued them together with craft glue and used sharp scissors to cut it all into shape.

I glued it to the plaster edge I had left myself and then hot glued sticks from the bottom to the ground for structural support. I then hand painted the creamy white sticks to look like darker timber.

14. I added sticks, string and beads. I added the same string and beads to the bridge and heaps of moss everywhere with craft/wood glue.


15. Time to furnish and decorate… I found a mini chairs and table and fence online. I bent the fence to follow the contours of my landscape and hot glued it in.

16. I got plastic filing folders from Officeworks. I bought three of them in purple (my daughters favourite colour) and cut them to shape so they would roll up inside the wood and add color to the light.I added little flowers and stick on gem stones to finish embellishing it. I also got a round offcut and glued it on for the verandah and glued in two posts.steve21


16. I sculpted the front door out of Sculpey and glued it in, leaving it slightly open to let light out and make it look inviting. I glued a bead on for the door handle.



One happy little camper! Happy Birthday Jade


View more images of Steve’s fairy lamp house progress below:

Fairy Gardening Australia thanks Steve Mason for his contribution. Images © Steve Mason.

Kim Shaw

Kim Shaw is the founder and creative director of Fairy Gardening Australia. Mum of three, professional fairy gardener, practitioner of magick and advocate for fairy freedom.

Magic Bean Exchange

Convert your Magic Beans to vouchers here

Exchange 200 ❧ for $10 voucher

You must be logged in to exchange Magic Beans.
  • You MUST have a minimum balance of 200❧ in your account to use the Magic Bean Exchange
  • Voucher is valid for 1 year from the date of issue
  • Copy the generated code and paste into code box upon checkout. Your code has also been emailed to you and is recorded in your Magic Bean Purse Log which can be accessed through your member dashboard
  • Voucher is single use and redeemable on orders where cart total is over $50.00
  • Multiple vouchers are not accepted on a single order
  • Full Terms & Conditions can be found here

DO NOT REFRESH THIS PAGE. Doing so may void your voucher. Please close box and use navigation menus.

Can we add some magic to your inbox?

Every week, we bundle all our good things into a newsletter , infuse it with a special blend of enchantment and folderol, tie it up with a gossamer bow and send it to our subscribers. We’d love you to be one of them.

Close Panel
Add $300.00 for free shipping